Mirro
M-0534-11 Pressure Cooker Parts
4 Quart
Models Manufactured before January 1983:
If Your Model was manufactured before Jan. 1983,
the replacement vent pipe and pressure regulator has changed.
If your vent pipe looks like Vent Pipe B (image to the right)
then, when replacing either the vent pipe or regulator you will
need to replace both.
(Vent Pipe A is the new replacement, Vent Pipe B is the older type)
(Vent Pipe A is the new replacement, Vent Pipe B is the older type)
85341 Cooking Canning Rack
Rack measures 6 5/8" in diameter
Rack measures 6 5/8" in diameter
Opc85341
$6.99
9888 Metal Safety Fuse
More Info
Important Information
Older Models that have a 6 sided nut shaped
Safety Fuse on the underside of lid,
this is the proper replacement.
More Info
Important Information
Older Models that have a 6 sided nut shaped
Safety Fuse on the underside of lid,
this is the proper replacement.
Opc9888
$9.49
9732 Fuse Over Pressure Plug
More Info
Important Information
Models that have a pliable push in
Safety Fuse on the underside of lid,
this is the proper replacement.
Note: The color of these have not always been red.
More Info
Important Information
Models that have a pliable push in
Safety Fuse on the underside of lid,
this is the proper replacement.
Note: The color of these have not always been red.
Opc48874
$3.99
9894 Vent Tube
More Info
Important Information
When Replacing Vent Tube,
If your model was manufactured before Jan. 1983,
you must also replace Pressure Regulator.
(see note on top of this page)
More Info
Important Information
When Replacing Vent Tube,
If your model was manufactured before Jan. 1983,
you must also replace Pressure Regulator.
(see note on top of this page)
Opc30031
$9.49
Vent Tube Cleaning Rod
Removes clogs and cleans in one step
Removes clogs and cleans in one step
OpcAA75Rod
$3.95
9898 Pressure Regulator
More Info
Important Information
When Replacing Pressure Rrgulator,
If your model was manufactured before Jan. 1983,
you must also replace Vent Tube.
(see note on top of this page)
More Info
Important Information
When Replacing Pressure Rrgulator,
If your model was manufactured before Jan. 1983,
you must also replace Vent Tube.
(see note on top of this page)
A35797
$17.99
9709 Lift Pin Grommet
This is only the rubber grommet for the 9709 Lift Pin. Purchase if you will be reusing your old pin.
More Info
This is only the rubber grommet for the 9709 Lift Pin. Purchase if you will be reusing your old pin.
More Info
Opc9709G
$3.99
S-9711-56 Handle
OpcMI971156
$6.99
